display ap fan

Function

The display ap fan command displays fan information about an AP.

Format

display ap fan { ap-name ap-name | ap-id ap-id }

Parameters

Parameter	Description	Value
ap-name ap-name	Displays fan information about the AP with a specified name.	The AP name must exist.
ap-id ap-id	Displays fan information about the AP with a specified ID.	The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check fan information about an AP, including the fan speed, operating mode, and airflow direction.

Example

# Display fan information about AP 0.

<HUAWEI> display ap fan ap-id 0
---------------------------------------------------------------------------------------
Fan   State    Speed rate   Mode   Airflow direction
---------------------------------------------------------------------------------------
0     Running  40%          AUTO   Front-to-Back
1     Running  40%          AUTO   Front-to-Back
---------------------------------------------------------------------------------------

**Table 1** Description of the **display ap fan** command output
Item	Description
Fan	Fan ID.
State	Status of a fan. Absent: The fan is not in position. Abnormal: The fan is working abnormally. Running: The fan is running. Stop: The fan stops.
Speed rate	Ratio of the current fan speed to the full speed.
Mode	Operating mode of a fan. AUTO: automatic mode MANUAL: manual mode
Airflow direction	Airflow direction of a fan. Front-to-Back: Air flows from the front to the rear.