display ap power-workmode

Function

The display ap power-workmode command displays the current power mode of APs.

Format

display ap power-workmode { all | ap-name ap-name | ap-id ap-id | ap-mac ap-mac | ap-group ap-group }

Parameters

Parameter	Description	Value
all	Displays the current power mode of all APs.	-
ap-name ap-name	Displays the current power mode of the AP with a specified name.	The AP name must exist.
ap-id ap-id	Displays the current power mode of the AP with a specified ID.	The AP ID must exist.
ap-mac ap-mac	Displays the current power mode of the AP with a specified MAC address.	The AP's MAC address must exist.
ap-group ap-group	Displays the current power mode of APs in a specified AP group.	The AP group must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When an AP is supplied with DC or PoE power, the AP may work in low-power mode if the power fails to meet requirements. You can run this command to view the current power mode of the AP and verify that the current power mode can enable the AP to work with all functions.

Example

# Display the current power mode of all APs.

<HUAWEI> display ap power-workmode all
-----------------------------------------------------------------------------------------------------------------------------------
ID     MAC              Name    Group     Power-workmode     Decided by
-----------------------------------------------------------------------------------------------------------------------------------
0     dcd2-fcf6-76a0    ap_1    default   AT(FULL)           LLDP 
-----------------------------------------------------------------------------------------------------------------------------------
Total: 1

**Table 1** Description of the **display ap power-workmode** command output
Item	Description
ID	AP ID.
MAC	AP MAC address.
Name	AP name.
Group	AP group to which an AP belongs.
Power-workmode	Current power mode of an AP. The power mode of an AP can be AF, AT, or BT, which represents 802.3af, 802.3at, or 802.3bt, respectively. The working mode of an AP can be Full, Limited, or Disabled. In Full mode, functions of the AP are unrestricted. In Limited mode, functions of the AP are partially restricted. In Disabled mode, the AP restarts due to insufficient power supply, and you are not advised to use the AP in this mode.
Decided by	The current power mode of an AP is determined by: LLDP: LLDP negotiation result Hardware detect: hardware detection result AP capability: its own highest capability