display as access configuration

Function

The display as access configuration command displays the access configuration of ASs.

Only the switches that function as ASs support this command.

Format

display as access configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display as access configuration command on an AS to check the access configuration of the AS.

Example

# Display the access configuration of an AS.

<HUAWEI> display as access configuration
    AS mode                             : centralized
    Access interface                    : vlanif11
    Access controller configuration     : --
    Current connected access controller : 192.168.11.1(dynamic)
    Access management MAC               : 0200-0000-0022
    Access system MAC                   : 0200-0000-0022
    Current connected state             : normal

**Table 1** Description of the **display as access configuration** command output
Item	Description
AS mode	AS mode: disable: The device works in parent mode. To change the device working mode, run the as-mode disable command. enable: The device works in AS mode, but it does not have the SVF function enabled using the uni-mng command. centralized: The device works in AS mode and the service configuration mode is centralized mode. independent: The device works in AS mode and the service configuration mode is independent mode.
Access interface	VLANIF interface for the management VLAN of an AS.
Access controller configuration	Parent IP address configured using the as access controller ip-address command. If this IP address is configured, the Current connected access controller field value contains configured.
Current connected access controller	IP address of the parent to which an AS is connected. If this field contains dynamic, the IP address is obtained through DHCP or in broadcast mode. If this field contains configured, the IP address is statically configured. If an AS does not go online, this field displays --.
Access management MAC	Configured management MAC address of an AS.
Access system MAC	System MAC address of an AS.
Current connected state	Connection status of an AS: idle: The AS is in initial state. normal: The AS has gone online and connected to an SVF system. fault: The AS does not connect to an SVF system. version mismatch: The V, R, or C versions of the AS and parent are inconsistent.