display bgp multicast network

Function

The display bgp multicast network command displays the routes to be advertised by MBGP through the network command.

Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

display bgp multicast network

Parameters

None.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command is used to display all the configurations of the network (BGP) command in the IPv4 multicast address family view. Routes can be imported and then advertised by MBGP only when the route prefix satisfies the following conditions:

It is specified in the network command.
It already exists in the IP routing table.
It is active.

Example

# Display the routing information of a network segment advertised by MBGP.

<HUAWEI> display bgp multicast network

  BGP Local Router ID is 10.2.2.9

  Local AS Number is 100(Multicast)

  Network          Mask            Route-policy

  10.1.1.1         255.255.255.0

  10.2.2.2         255.255.255.0

**Table 1** Description of the display bgp multicast network command output
Item	Description
BGP Local Router ID	ID of the local MBGP router
Local AS Number	Number of the local AS
Network	Network address locally advertised
Mask	Mask of the network address
Route-policy	Used routing policy