display built-in power

Function

The display built-in power command displays the built-in power supply status of switches with extended temperature range.

Only S5720I-28X-SI-AC and S5720I-28X-PWH-SI-AC support this command.

Format

display built-in power

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display built-in power command to check whether the built-in power supply status of switches with extended temperature range is normal.

If some member switches do not support this command, the system displays a prompt message.

Example

# Display the built-in power supply status of switches with extended temperature range.

<HUAWEI> display built-in power
------------------------------------------------------------                                                                        
 Slot    PowerID     State                                                                                                          
------------------------------------------------------------                                                                        
 1       PWR1        Normal                                                                                                         
         PWR2        Abnormal                                                                                                       
 2       PWR1        Normal                                                                                                         
         PWR2        Abnormal                                                                                                       
------------------------------------------------------------                                                                        
Info: Slot 0 does not support the command.

Choose Columns...

**Table 1** Description of the **display built-in power** command output
Item	Description
Slot	Slot ID.
PowerID	Power supply ID.
State	Power supply status: Abnormal Normal