display ap-card all

Function

The display ap-card all command displays brief information about cards on all the APs.

Format

display ap-card all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

To query brief information about cards on all the APs, run the display ap-card all command.

No result is displayed for a card if it does not support query.

Example

# Display brief information about cards on all the APs.

<HUAWEI> display ap-card all
Connected-status: The match status indicates that the card connection type matches
that on the device. Otherwise, mismatch is displayed. To modify the effective connection
type, run the card connect-type {serial|ethernet} command.
Frame-version: Frame format on extended interfaces.
-------------------------------------------------------------------------------------------------------------------------------------
---------------------------
AP ID  Card-number  Wireless-standard  Vendor-name  Card-type      Card-connect-type  Connected-status  Antenna-status  Baud-rate  Fr
ame-version  Serial-number
-------------------------------------------------------------------------------------------------------------------------------------
---------------------------
2      1            RFID               ENJOYOR      TOEAPV1.2      ethernet(up)       match             External        9600       2.
0            0000000000000001
-------------------------------------------------------------------------------------------------------------------------------------
---------------------------
Total: 1

**Table 1** Description of the **display ap-card all** command output
Item	Description
AP ID	AP ID.
Card-number	Card ID.
Wireless-standard	Wireless protocol supported by a card. The value is a 10-byte ASCII character set, for example, RFID, ANT, ZigBee, BT4.0, and Weightless.
Vendor-name	Vendor code. The value is an 8-byte ASCII character set, for example, ENJOYOR.
Card-type	Card model. The value is a 12-byte ASCII character set, for example, TOEAPV1.2.
Card-connect-type	Connection type between the IoT card and AP.
Connected-status	Whether the actual connection type of an IoT card matches the current initialized connection type of the AP.
Antenna-status	Whether an IoT card uses the built-in or external antenna. External: external antenna Internal: built-in antenna
Baud-rate	Baud rate for communication between the card and AP.
Frame-version	Frame format of an extension interface.
Serial-number	Module ID of the card. The value is a 16-byte BCD character set.