display cfm default md

Function

The display cfm default md command displays information about the default MD.

Format

display cfm default md

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can use the display cfm default md command to view information about the level of the default MD, MIP creation rule, Sender ID TLV type, and IDs of VLANs associated with the default MD.

Prerequisites

CFM has been enabled globally using the cfm enable (system view) command.

Precautions

IEEE 802.1ag has two versions: IEEE 802.1ag Draft 7 and IEEE Standard 802.1ag-2007. This command can be used only on the device running IEEE Standard 802.1ag-2007.

Example

# Display information about the default MD.

<HUAWEI> display cfm default md

Level   MIP-Create-type   SenderID TLV-type   VLAN-List
----------------------------------------------------------------------------------------
7       default           defer               100 to 200 2049

**Table 1** Description of the **display cfm default md** command output
Item	Description
Level	Level of the default MD. The value ranges from 0 to 7. A higher level represents a higher priority of the default MD.
MIP-Create-type	MIP creation rule: default explicit none
SenderID TLV-type	Type of the Sender ID TLV filled in the CCM: none chassis manage chassisManage defer
VLAN-List	IDs of VLANs associated with the default MD.