display netconf register-fail-record

Function

The display netconf register-fail-record command displays records about failed registrations with iMaster NCE-Campus.

Format

display netconf register-fail-record

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After this command is executed, a maximum of five registration failure records can be displayed.

Example

# Display records about failed registrations with iMaster NCE-Campus.

<HUAWEI> display netconf register-fail-record
------------------------------------------------------------------------------  
Time                        Error Info
------------------------------------------------------------------------------  
2019/11/09 22:21:02         Failed to apply IP address
2019/11/09 23:12:13         Failed to create TCP link to controller (192.168.1.1)
------------------------------------------------------------------------------

**Table 1** Description of the **display netconf register-fail-record** command output
Item	Description
Time	Registration failure time.
Error Info	Reason for the registration failure. The IP address in this parameter value is the IP address of iMaster NCE-Campus with which the switch failed to register. Possible reasons are as follows: Manage VLAN is physical down Change to tradition work mode failed Failed to apply IP address No DNS information in DHCP options No controller IP or URL information Failed to get IP address of controller Failed to create TCP link to controller Failed to get register result from controller Controller certificate authentication failed Controller ESN check failed Device is not authorized Device type and ESN does not match Failed to connect registration center The configuration of the device is inconsistent with that of the Agile Controller Others