display configuration-occupied user

Function

The display configuration-occupied user command displays information about the user who locks the configuration.

Format

display configuration-occupied user

Parameters

None

Views

All views

Default Level

2: Configuration level

Usage Guidelines

You can run the display configuration-occupied user command to query the user who has the configuration right. If no user locks the system configuration, the system displays a corresponding message.

Example

# Display the user who locks the configuration.

<HUAWEI> display configuration-occupied user

User Index: 34
User Session Name: VTY0
User Name:**
IP Address: 10.135.19.22
Locked Time: 2012-09-16 15:26:32+10:00 DST
Last Configuration Time: 2012-09-16 15:26:32+10:00 DST
The time out value of configuration right locked is: 30 second(s)

**Table 1** Description of the **display configuration-occupied user** command output
Item	Description
User Index	User index.
User Session Name	User session name. The value is CON0 or ranges from VTY0 to VTY14. snmp-agent: session name of an NMS user.
User Name	Name of a login user. If a login user name is **, the user logs in to a device using a serial port or the password authentication mode. If the login user name is a community or V3 user name, the user is an NMS user.
IP Address	IP address of the user.
Locked Time	Time when the configuration was locked.
Last Configuration Time	Time when the user delivered the last configuration command.
The time out value of configuration right locked is	Duration for locking the configuration. To configure the duration, run the configuration-occupied timeout command.

# Display the user who locks the system configuration (when no user locks the system configuration).

<HUAWEI> display configuration-occupied user

Info: No user locked the current configuration.