display cpu-defend port-type

Function

The display cpu-defend port-type command displays physical interfaces of Network-to-Network Interface (NNI), User-to-Network Interface (UNI), and Enhanced Network Interface (ENI) types.

Only the S5720-EI, S6720S-EI, and S6720-EI support this command.

Format

display cpu-defend port-type slot slot-id

Parameters

Parameter	Description	Value
slot slot-id	This parameter specifies the slot ID if stacking is not configured. This parameter specifies the stack ID if a stack is configured.	The value must be set according to the device configuration.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After specifying interfaces types for sending protocol packets using the port type { uni | eni | nni } and port-type { uni | eni | nni } packet-type type commands, you can run the display cpu-defend port-type command to view types of interfaces on the device.

Example

# Display interface types in stack 0.

<HUAWEI> display cpu-defend port-type slot 0
 Uni Port :                                                                     
 Eni Port :                                                                     
 Nni Port :GigabitEthernet0/0/1-22

**Table 1** Description of the display cpu-defend port-type command output
Item	Description
Uni Port	The interface is a user-side interface on the device.
Eni Port	The interface is an interface connected to another switch or user.
Nni Port	The interface is a network-side interface on the device.