display default-parameter mvpn

Function

The display default-parameter mvpn command displays default configurations about the multicast VPN (MVPN).

Format

display default-parameter mvpn

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Using this command displays only default configurations, regardless of whether the configurations about MVPN parameters are changed.

Example

# Display default configurations about the MVPN.

<HUAWEI> display default-parameter mvpn
  MVPN Instance View Default Configurations:                                    
  ------------------------------------------                                    
  Multicast-domain switch-delay: 5 s                                            
  Multicast-domain switch threshold: 0 kbps-preferred                           
  Multicast-domain holddown-time: 60 s                                          
  Multicast-domain log switch-group-reuse: disabled                             
  Multicast-domain share-group: disabled                                        
  Multicast-domain switch-group-pool: disabled                                  
  Multicast-domain auto-discovery: disabled                                     
  Multicast-domain switch-without-register: disabled                            
  Multicast extranet select-rpf rule: disabled

**Table 1** Description of the **display default-parameter mvpn** command output
Item	Description
MVPN Instance View Default Configurations	Default configurations in the MVPN instance view.
Multicast-domain switch-delay	Delay in switching from the share-MDT to the switch-MDT. This parameter can be configured using the multicast-domain switch-delay command in the VPN instance view or VPN IPv4 address family view.
Multicast-domain switch threshold	Threshold of the multicast packet rate that can trigger the switch to the switch-MDT. This parameter can be configured using the multicast-domain switch-group-pool command in the VPN instance view or VPN IPv4 address family view.
Multicast-domain holddown-time	Delay in switching from the switch-MDT to the share-MDT. This parameter can be configured using the multicast-domain holddown-time command in the VPN instance view or VPN IPv4 address family view.
Multicast-domain log switch-group-reuse	Whether recording logs about switch-group address reuse is configured. This parameter can be configured using the multicast-domain log switch-group-reuse command in the VPN instance view or VPN IPv4 address family view.
Multicast-domain share-group	Whether the Share-Group address is configured and whether the MTI is bound to a VPN instance. This parameter can be configured using the multicast-domain share-group binding command in the VPN instance view or VPN IPv4 address family view.
Multicast-domain switch-group-pool	Whether the range of the switch-MDT switch-group-pool is configured. This parameter can be configured using the multicast-domain switch-group-pool command in the VPN instance view or VPN IPv4 address family view.
Multicast-domain auto-discovery	Whether the A-D mode is configured for the VPN. The switch does not support the A-D mode currently.
Multicast-domain switch-without-register	Whether the source PE sends the null Register message to the RP to establish the SPT on the public network before the Switch-Group address is used to encapsulate VPN data. This parameter can be configured using the multicast-domain switch-without-register command in the VPN instance view or VPN IPv4 address family view.
Multicast extranet select-rpf rule	Whether the multicast routing policy configured for a VPN is configured. The switch does not support the configuration of a multicast routing policy for a VPN currently.