display default-parameter ospf

Function

The display default-parameter ospf command displays the default OSPF configuration.

Format

display default-parameter ospf

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display default-parameter ospf command to check the default OSPF configuration during OSPF initialization. After the OSPF configuration is modified, this command still displays the default OSPF configuration during OSPF initialization.

Example

# Display the default OSPF configuration.

<HUAWEI> display default-parameter ospf
 Process View:
 -------------------------------------------------------
   Default Metric                               : 1
   Default Tag                                  : 1
   Default Type                                 : 2
   SPF Intelligent-timer Max-interval(msec)     : 10000
   SPF Intelligent-timer Start-interval(msec)   : 500
   SPF Intelligent-timer Hold-interval(msec)    : 1000
   Lsa Maxage (sec)                             : 3600
   Lsa Refresh Time(sec)                        : 1800
   Lsa Maxagediff Interval (sec)                : 900
   Minimum Lsa Arrival Interval(sec)            : 1
   Minimum Lsa Originate Interval(sec)          : 5
   Sham Link Cost                               : 1
   VPN Domain ID                                : 0
   VPN Router Tag                               : 0
   Route Preference for Internal Routes         : 10
   Route Preference for External Routes         : 150
 -------------------------------------------------------

 Area View:
 -------------------------------------------------------
   Default Stub Cost                            : 1
 -------------------------------------------------------

 Interface View:
 -------------------------------------------------------
   P2P&Broadcast Hello Interval(sec)            : 10
   P2MP&NBMA Hello Interval(sec)                : 30
   P2P&Broadcast Dead Interval(sec)             : 40
   P2MP&NBMA Dead Interval(sec)                 : 120
   Poll Interval(sec)                           : 120
   Router DR Priority                           : 1
   Retransmit Interval(sec)                     : 5
   Transmit Delay(sec)                          : 1
 -------------------------------------------------------

**Table 1** Description of the **display default-parameter** **ospf** command output
Item	Description
Process View	Process view.
Default Metric	Default metric of the imported external route.
Default Tag	Default tag value of the imported external route.
Default Type	Default type of the imported external route.
SPF Intelligent-timer Max-interval(msec)	Default maximum interval of SPF calculation.
SPF Intelligent-timer Start-interval(msec)	Default start interval of SPF calculation.
SPF Intelligent-timer Hold-interval(msec)	Default hold interval of SPF calculation.
Lsa Maxage(sec)	Default maximum age of the LSA.
Lsa Refresh Time(sec)	Default maximum interval for generating an LSA. If the LS age of the LSAs generated by the device reaches the LSA Refresh Time, a new instance must be generated for the LSAs.
Lsa Maxagediff Interval(sec)	Default value difference in the MaxAge fields of LSAs. If the value difference in the MaxAge fields of two LSAs is greater than MaxAgeDiff Interval, the two LSAs are considered to belong to different instances of the same LSA.
Minimum Lsa Arrival Interval(sec)	Default minimum interval for receiving the same LSA.
Minimum Lsa Originate Interval(sec)	Default minimum interval for sending the same LSA.
Sham Link Cost	Default cost of the sham link.
VPN Domain ID	Default domain ID of the VPN.
VPN Router Tag	Default router tag of the VPN.
Route Preference for Internal Routes	Default preference of the internal route.
Route Preference for External Routes	Default preference of the external route.
Area View	Area view.
Default Stub Cost	Default cost of a route in the stub area.
Interface View	Interface view.
P2P&Broadcast Hello Interval(sec)	Default interval for sending Hello packets on a P2P or broadcast network.
P2MP&NBMA Hello Interval(sec)	Default interval for sending Hello packets on a P2MP or NBMA network.
P2P&Broadcast Dead Interval(sec)	Default interval for declaring a neighbor to be Down after no Hello packets are received on a P2P or broadcast network.
P2MP&NBMA Dead Interval(sec)	Default interval for declaring a neighbor to be Down after no Hello packets are received on a P2MP or NBMA network.
Poll Interval(sec)	Default interval for the local device to send Hello packets to a neighbor in the Down state on the NBMA network. The value of Poll Interval is greater than the value of Hello Interval.
Router DR Priority	Default priority of the DR.
Retransmit Interval(sec)	Default interval for retransmitting packets.
Transmit Delay(sec)	Default estimated time for transmitting an LSU packet over this interface. LSAs in the LSU packet must have their age incremented by this amount before transmission.