display default-parameter pim-dm6

Function

The display default-parameter pim-dm6 command displays default PIM-DM (IPv6) configurations.

Format

display default-parameter pim-dm6

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display default-parameter pim-dm6 command displays default PIM-DM (IPv6) configurations. Even if PIM-DM (IPv6) parameters are modified, the display default-parameter pim-dm6 command still displays default parameter settings. Therefore, you can use this command to check which parameters have been modified.

Example

# Display default configurations about PIM-DM (IPv6).

<HUAWEI> display default-parameter pim-dm6
  PIM6 View Default Configurations:
  ---------------------------------
  Hello-option dr-priority: 1
  Hello-option holdtime: 105 s
  Hello-option lan-delay: 500 ms
  Hello-option neighbor-tracking: disabled
  Hello-option override-interval: 2500 ms
  Holdtime assert: 180 s
  Holdtime join-prune: 210 s
  Source-lifetime: 210 s
  State-refresh-interval: 60 s
  State-refresh-rate-limit: 30 s
  State-refresh-ttl: 255
  Hello periodic interval: 30 s
  Join-prune periodic interval: 60 s

  Interface View Default Configurations:
  --------------------------------------
  Pim bfd: disabled
  Pim hello-option dr-priority: 1
  Pim hello-option holdtime: 105 s
  Pim hello-option lan-delay: 500 ms
  Pim hello-option neighbor-tracking: disabled
  Pim hello-option override-interval: 2500 ms
  Pim holdtime assert: 180 s
  Pim holdtime join-prune: 210 s
  Pim require-genid: disabled
  Pim silent: disabled
  Pim state-refresh-capable: enabled
  Pim timer dr-switch-delay: disabled
  Pim timer graft-retry: 3 s
  Pim hello periodic interval: 30 s
  Pim join-prune periodic interval: 60 s
  Pim triggered-hello-delay: 5 s
  Pim version: 2
  Pim ipsec sa: disabled
  Pim neighbor-policy: disabled

Choose Columns...

**Table 1** Description of the **display default-parameter pim-dm6** command output
Item	Description
PIM6 View Default Configurations	Default configurations in the PIM-IPv6 view.
Hello-option dr-priority	Priority for DR election. This parameter is configured by the hello-option dr-priority (IPv6) command.
Hello-option holdtime	Time period for the neighbor to hold the reachable state. This parameter is configured by the hello-option holdtime (IPv6) command.
Hello-option lan-delay	Delay in transmitting Prune messages at a shared network segment. This parameter is configured by the hello-option lan-delay (IPv6) command.
Hello-option neighbor-tracking	Whether neighbor tracking is enabled. enabled: Neighbor tracking is enabled. disabled: Neighbor tracking is disabled This function is configured using the hello-option neighbor-tracking (IPv6) command.
Hello-option override-interval	Interval for sending Prune Override messages. This parameter is configured by the hello-option override-interval (IPv6) command.
Holdtime assert	Time period for holding the Assert state. This parameter is configured by the holdtime assert (IPv6) command.
Holdtime join-prune	Time period for holding the Join or Prune state. This parameter is configured by the holdtime join-prune (IPv6) command.
Source-lifetime	Timeout period of an (S, G) entry. This parameter is configured by the source-lifetime (IPv6) command.
State-refresh-interval	Interval for sending State-Refresh messages. This parameter is configured by the state-refresh-interval (IPv6) command.
State-refresh-rate-limit	Minimum interval from when the last State-Refresh message is received to when the next State-Refresh message is received. This parameter is configured by the state-refresh-rate-limit (IPv6) command.
State-refresh-ttl	TTL value of the State-Refresh message. This parameter is configured by the state-refresh-ttl (IPv6) command.
Hello periodic interval	Interval for sending Hello messages. This parameter is configured by the timer hello (IPv6) command.
Join-prune periodic interval	Interval for sending Join/Prune messages. This parameter is configured by the timer join-prune (IPv6) command.
Interface View Default Configurations	Default configurations in the interface view.
Pim bfd	Whether the PIM BFD is enabled on the interface. This parameter is configured by the pim ipv6 bfd enable command.
Pim hello-option dr-priority	Priority for DR election on the interface. This parameter is configured by the pim ipv6 hello-option dr-priority command.
Pim hello-option holdtime	Time period for the neighbor on the interface to hold the reachable state. This parameter is configured by the pim ipv6 hello-option holdtime command.
Pim hello-option lan-delay	Delay in transmitting Prune messages at the shared network segment where the interface resides. This parameter is configured by the pim ipv6 hello-option lan-delay command.
Pim hello-option neighbor-tracking	Whether neighbor tracking is enabled on the interface. enabled: Neighbor tracking is enabled. disabled: Neighbor tracking is disabled This function is configured using the pim ipv6 hello-option neighbor-tracking command.
Pim hello-option override-interval	Interval for the interface to send Prune Override messages. This parameter is configured by the pim ipv6 hello-option override-interval command.
Pim holdtime assert	Time period for the interface to hold the Assert state. This parameter is configured by the pim ipv6 holdtime assert command.
Pim holdtime join-prune	Time period for the interface to hold the Join or Prune state. This parameter is configured by the pim ipv6 holdtime join-prune command.
Pim require-genid	Whether the received Hello message is required to carry the Generation ID. enabled: The received Hello message is required to carry the Generation ID. disabled: The received Hello message is not required to carry the Generation ID. This parameter is configured using the pim ipv6 require-genid command.
Pim silent	Whether the interface is in PIM silent state. enabled: The interface is in PIM silent state. disabled The interface is not in PIM silent state. This parameter is configured using the pim ipv6 silent command.
Pim state-refresh-capable	Whether State-Refresh is enabled on the interface. enabled: State-Refresh is enabled on the interface. disabled: State-Refresh is disabled on the interface. This function is configured using the pim ipv6 state-refresh-capable command.
Pim timer dr-switch-delay	Whether the DR switch delay is set on the interface. enabled: The DR switch delay is set on the interface. disabled: The DR switch delay is not set on the interface. This function is configured using the pim ipv6 timer dr-switch-delay command.
Pim timer graft-retry	Interval for the interface to retransmit Graft messages. This parameter is configured by the pim ipv6 timer graft-retry command.
Pim hello periodic interval	Interval for the interface to send Hello messages. This parameter is configured by the pim ipv6 timer hello command.
Pim join-prune periodic interval	Interval for the interface to send Join/Prune messages. This parameter is configured by the pim ipv6 timer join-prune command.
Pim triggered-hello-delay	Maximum delay for the interface to send Hello messages. This parameter is configured by the pim ipv6 triggered-hello-delay command.
Pim version	Version of PIM enabled on the interface.
Pim ipsec sa	Whether PIM IPSec is enabled on the interface. The switch does not support this function.
Pim neighbor-policy	Whether the neighbor-policy is set on the interface. enabled: A neighbor policy is configured on the interface. disabled: No neighbor policy is configured on the interface. This function is configured using the pim ipv6 neighbor-policy command.