display device usb-deployment configuration

Function

The display device usb-deployment configuration command displays the configuration of USB-based deployment.

Format

display device usb-deployment configuration

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

After the USB-based deployment configuration is completed, you can run this command to view related configuration information, including whether USB-based deployment is enabled, configuration file encryption password, and whether HMAC check is enabled.

Example

# Display the configuration of USB-based deployment.

<HUAWEI> display device usb-deployment configuration
USB-deployment: disable
Config-file password: %#%#:(t!-9uZcGmZ2T=F-Ch'1^gu,]|nmGSTzYJoqi89%#%#
HMAC: enable

**Table 1** Description of the **display device usb-deployment configuration** command output
Item	Description
USB-deployment	Whether USB-based deployment is enabled. disable: indicates that USB-based deployment is disabled on an interface. enable: indicates that USB-based deployment is enabled on an interface.
Config-file password	Configuration file encryption password. When no password is configured, this field is empty.
HMAC	Whether HMAC check is enabled. disable: indicates that HMAC check is disabled on an interface. enable: indicates that HMAC check is enabled on an interface.