display dhcp server group

Function

The display dhcp server group command displays the configuration of a DHCP server group.

Format

display dhcp server group [ group-name ]

Parameters

Parameter	Description	Value
group-name	Displays the configuration of a specified DHCP server group.	The value must be an existing DHCP server group on the device.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

This command applies to DHCP relay agents. The display dhcp server group command displays information about all the DHCP server groups of a DHCP relay agent and the number of DHCP servers in the DHCP server groups. If group-name is specified, the display dhcp server group group-name command displays DHCP server addresses and the number of DHCP servers in a specified DHCP server group.

Prerequisites

A DHCP server group has been created on a DHCP relay agent using the dhcp server group command.

Example

# Display the configuration of the DHCP server group myServers.

<HUAWEI> display dhcp server group myServers
  Group-name          : myServers                                               
    (0)  Server-IP    : 10.1.1.1 
    Gateway           : 10.10.10.1
    VPN instance      : --

**Table 1** Description of the **display dhcp server group** command output
Item	Description
Group-name	Name of a DHCP server group. To specify the parameter, run the dhcp server group command.
(x) Server-IP	IP addresses of DHCP servers in a DHCP server group. x is the index of the IP addresses and ranges from 0 to 19. To specify the parameter, run the dhcp-server command.
Gateway	Gateway address of the DHCP server in the DHCP server group. To specify the parameter, run the gateway command.
VPN instance	VPN instance to which the DHCP server group belongs. To specify the parameter, run the vpn-instance command.