display dot1q information

Function

The display dot1q information termination command displays the configuration of a dot1q sub-interface.

Format

display dot1q information termination [ interface interface-type interface-number [.subinterface-number ] ]

Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this configuration.

Parameters

Parameter	Description	Value
interface interface-type interface-number	Specifies the type and number of an interface.	-
subinterface-number	Specifies the number of a sub-interface.	The value is an integer that ranges from 1 to 4096.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring dot1q termination on sub-interfaces, run the display dot1q information termination command to view the sub-interfaces where dot1q termination is configured and configuration of the dot1q sub-interfaces.

Example

# Display the configuration of all dot1q sub-interfaces.

<HUAWEI> display dot1q information termination
  XGigabitEthernet0/0/1.3
    Total QinQ Num: 1
    dot1q  termination vid 3
    Total vlan-group Num: 0

**Table 1** Description of the display dot1q information command output
Item	Description
XGigabitEthernet0/0/1.3	Sub-interface name.
Total QinQ Num	Number of QinQ entries configured for user packets on a sub-interface.
dot1q termination vid 3	VLAN allowed by a sub-interface. To specify the parameter, run the dot1q termination vid command.
Total vlan-group Num	Number of VLAN groups configured on a sub-interface.