display e-trunk packet-statistics

Function

The display e-trunk packet-statistics command displays E-Trunk packet statistics.

Only the S5720-EI, S5720-HI, S5720I-SI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720-LI, S6720S-EI, S6720S-LI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

display e-trunk packet-statistics [ e-trunk-id e-trunk-id ]

Parameters

Parameter	Description	Value
e-trunk-id e-trunk-id	Display packet statistics about an E-Trunk. e-trunk-id specified the ID of the E-Trunk.	The value is an integer that ranges from 1 to 16.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After an E-Trunk is successfully configured, you can run the display e-trunk packet-statistics command to check packet statistics about the E-Trunk. The command output helps you to determine whether data is normal and to locate faults.

Example

# Display E-Trunk packet statistics on the device.

<HUAWEI> display e-trunk packet-statistics

E-Trunk-ID errors : 0
Length errors     : 0

E-TRUNK-ID : 10
  Sent packets                                : 355
  Failed to send packets                      : 355
  Received packets                            : 0
  Received packets with priority errors       : 0
  Received packets with fail-time errors      : 0
  Received packets with state errors          : 0
  Received packets with state reason errors   : 0
  Received packets with peer-ip errors        : 0
  Received packets with authentication errors : 0
  Received packets with TLV check errors      : 0
  Received packets with system-id errors      : 1
  Dropped packets with BFD protection         : 0
  Received packets with member errors         : 53
  Received packets with sequence check errors : 0

**Table 1** Description of the **display e-trunk packet-statistics** command output
Item	Description
E-Trunk-ID errors	Number of packets with incorrect E-Trunk IDs.
Length errors	Number of packets with incorrect lengths.
E-TRUNK-ID	E-Trunk ID.
Sent packets	Number of sent E-Trunk packets.
Failed to send packets	Number of E-Trunk packets that fails to be sent.
Received packets	Number of received E-Trunk packets.
Received packets with priority errors	Number of received E-Trunk packets with incorrect priorities.
Received packets with fail-time errors	Number of received E-Trunk packets with timeout errors.
Received packets with state errors	Number of received E-Trunk packets with incorrect states.
Received packets with state reason errors	Number of received E-Trunk packets with incorrect state reasons.
Received packets with peer-ip errors	Number of received E-Trunk packets with incorrect remote IP addresses.
Received packets with authentication errors	Number of received E-Trunk packets with authentication errors.
Received packets with TLV check errors	Number of received E-Trunk packets with TLV check errors.
Received packets with system-id errors	Number of received E-Trunk packets with incorrect system IDs.
Dropped packets with BFD protection	Number of E-Trunk packets dropped during the active/standby switchover because BFD is used.
Received packets with member errors	Number of packets generated when the switch detects that Eth-Trunk member interfaces at both ends are different.
Received packets with sequence check errors	Number of received E-Trunk packets failing the sequence number check.