display flow-suppression interface

Function

The display flow-suppression interface command displays the traffic suppression configuration on an interface.

Format

display flow-suppression interface interface-type interface-number

Parameters

Parameter	Description	Value
interface interface-type interface-number	Specifies the type and number of an interface. interface-type specifies the type of the interface. interface-number specifies the interface number.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command can display the traffic suppression for broadcast, unknown multicast, and unknown unicast packets on the interface, including rate limiting mode and rate limit value.

Example

# Display the traffic suppression configuration on GE0/0/1.

<HUAWEI> display flow-suppression interface gigabitethernet 0/0/1
 storm type         rate mode   set rate value
-------------------------------------------------------------------------------
 unknown-unicast    percent     percent: 90%
 multicast          percent     percent: 90%
 broadcast          percent     percent: 90% 
 known-unicast      percent     percent: 100%
 known-multicast    percent     percent: 100%
-------------------------------------------------------------------------------

**Table 1** Description of the display flow-suppression interface command output
Item	Description
storm type	Traffic type. Broadcast traffic, unknown multicast traffic, unknown unicast traffic, known-unicast traffic, known-multicast traffic can be suppressed.
rate mode	Type of the rate limit. pps: packet mode percent: percentage mode
set rate value	Configured rate limit. The rate can be set by the following commands: broadcast-suppression multicast-suppression unicast-suppression known-unicast-suppression known-multicast--suppression