display garp timer

Function

The display garp timer command displays the values of GARP timers.

Format

display garp timer [ interface { interface-type interface-number [ to interface-type interface-number ] }&<1-10> ]

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays the GARP timers of the specified interface. interface-type specifies the type of an interface. interface-number specifies the number of an interface.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display garp timer command displays the values of GARP timers. When using this command, pay attention to the following points:

If interface interface-type interface-number is not specified, the system displays GARP timers of all the interfaces.
If interface interface-type interface-number is specified, the system displays GARP timers of the specified interface.

Example

# Display the values of the GARP timers of the specified interface.

<HUAWEI> display garp timer interface gigabitethernet 0/0/1

  GARP timers on port GigabitEthernet0/0/1
    GARP JoinTime                : 80 centiseconds
    GARP LeaveTime               : 240 centiseconds
    GARP LeaveAllTime            : 1000 centiseconds
    GARP HoldTime                : 40 centiseconds

**Table 1** Description of the display garp timer command output
Item	Description
GARP JoinTime	Value of the Join timer. You can run the garp timer command to set the Join timer.
GARP LeaveTime	Value of the Leave timer. You can run the garp timer command to set the Leave timer.
GARP LeaveAllTime	Value of the LeaveAll timer. You can run the garp timer leaveall command to set the LeaveAll timer.
GARP HoldTime	Value of the Hold timer. You can run the garp timer command to set the Hold timer.