display group-policy status

Function

The display group-policy status command displays the status of the controller associated with the device.

Format

display group-policy status

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After running the group-policy controller command, you can run this command to check the status of the controller associated with the device.

Example

# Display the status of the controller associated with the device.

<HUAWEI> display group-policy status
<HUAWEI> display group-policy status
Controller IP address: 192.168.1.1                                              
Controller port: 5222                                                           
Backup controller IP address: -                                                 
Backup controller port: -                                                       
Source IP address: 192.168.10.1                                                
State: not connected                                                            
Connected controller: master                                                    
Device protocol version: 2                                                      
Controller protocol version: -

**Table 1** Description of the **display group-policy status** command output
Item	Description
Controller IP address	IP address of the master controller. To configure the IP address of the master controller, run the group-policy controller command.
Controller port	Port number of the master controller that exchanges packets with the device. To configure the port number of the master controller, run the group-policy controller command.
Backup controller IP address	IP address of the backup controller. To configure the IP address of the backup controller, run the group-policy controller command.
Backup controller port	Port number of the backup controller that exchanges packets with the device. To configure the port number of the backup controller, run the group-policy controller command.
Source IP address	Source IP address that the device uses to communicate with the controller. To configure the source IP address, run the group-policy controller command.
State	Status of the connection between the device and controller. disabled: indicates that the free mobility function is disabled. not connected: indicates that the device and controller are not connected. working: indicates that the device and controller have been connected.
Connected controller	Controller connected to the device. master: indicates the master controller. slave: indicates the backup controller. none: indicates that the device and controller are not connected.
Device protocol version	Protocol version number of the device.
Controller protocol version	Protocol version number of the controller. The parameter displays - when the device is not registered on the controller.