display haca-server configuration

Function

The display haca-server configuration command displays the configurations of HACA server templates.

Format

display haca-server configuration [ template template-name ]

Parameters

Parameter	Description	Value
template template-name	Specifies the name of an HACA server template. If this parameter is not specified, the configuration of all the HACA server templates is displayed.	The HACA server template must already exist.

Parameter

Description

Value

template template-name

Specifies the name of an HACA server template.

If this parameter is not specified, the configuration of all the HACA server templates is displayed.

The HACA server template must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display haca-server configuration command output helps you check the configuration of HACA server templates or troubleshoot HACA.

Example

# Display the configurations of HACA server templates.

<HUAWEI> display haca-server configuration
  --------------------------------------------------------------------------- 
  HACA-server template name                  : haca 
  HACA-server server-ip-address(port)        : 10.22.85.246(50300) 
  HACA-server pki-realm-name                 : default 
  HACA-server Status                         : REGISTE 
  HACA-server source-ip-address              : - 
  HACA-server down-delay-interval(sec)       : 30 
  HACA-server response-timeout-interval(sec) : 5 
  HACA-server domain-included                : ORIGINAL 
  HACA-server heart-beat-interval(min)       : 20 
  HACA-server reconnection-interval(min)     : 1 
  HACA-server user-syn-interval(min)         : 9 
  HACA-server register-sync-interval(min)    : 15
  HACA-server server-escape-state            : 0 
  HACA-server accounting-stop-packet resend  : 3   
  --------------------------------------------------------------------------- 
  Total 1,1 printed

**Table 1** Description of the **display haca-server configuration** command output
Item	Description
HACA-server template name	Name of the HACA server template. To create an HACA server template, run the haca-server template command.
HACA-server server-ip-address(port)	IP address and port number of the HACA server. To set the IP address and port number for the HACA server, run the haca-server server-address command.
HACA-server pki-realm-name	Name of a PKI domain of the HACA server. To set the name of a PKI domain of the HACA server, run the haca-server server-address command.
HACA-server Status	Status of the HACA server. The values are as follows: IDLE: indicates the idle state. INIT: indicates the initial state. UP: indicates the UP state. REGISTE: indicates the registration state. DOWN: indicates the DOWN state.
HACA-server source-ip-address	Source IP address of HACA packets. To set the source IP address of HACA packets, run the haca-server source-ip command.
HACA-server down-delay-interval(sec)	Delay interval for HACA server to restart from the DOWN state, in seconds. To set the delay interval, run the haca-server timer down-delay command.
HACA-server response-timeout-interval(sec)	Timeout period for the HACA server to send reply packets, in seconds. To set the timeout period, run the haca-server timer response-timeout command.
HACA-server domain-included	Format of HACA user name. It specifies whether the user name sent to the HACA server contains a domain name. YES: indicates that the user name contains the domain name. NO: indicates that the user name does not contain the domain name. ORIGINAL: indicates that the device does not modify the user name entered by the user. To set the user name format, run the haca-server user-name command.
HACA-server heart-beat-interval(min)	Interval for the HACA server to send heartbeat packets, in minutes. To set the heartbeat interval, run the haca-server timer heart-beat command.
HACA-server reconnection-interval(min)	Interval for the HACA server to be reconnected, in minutes. To set the reconnection interval, run the haca-server timer reconnection command.
HACA-server user-syn-interval(min)	Interval for synchronizing HACA user information, in minutes. To set the synchronization interval, run the haca-server timer user-syn command.
HACA-server register-sync-interval(min)	Interval for the HACA server to send registration synchronization packets, in minutes. To set the reconnection interval, run the haca-server timer register-sync command.
HACA-server server-escape-state	Escape state of HACA. 0: indicates that the server is in the UP state, and the best-effort path will not be used. 1: indicates that the server is in the DOWN state, and the best-effort path is being prepared. 2: indicates that the server is in the initial state, and the best-effort path will not be used.
HACA-server accounting-stop-packet resend	Number of times HACA accounting-stop packets are retransmitted. To set the number of times HACA accounting-stop packets can be retransmitted, run the haca-server accounting-stop-packet resend command.