display hsb-service

Function

The display hsb-service command displays information about an HSB service.

Format

display hsb-service service-index

Parameters

Parameter	Description	Value
service-index	Specifies the ID of an HSB service.	The value is fixed as 0.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view information about an HSB service.

Example

# Display the HSB service configuration.

<HUAWEI> display hsb-service 0
Hot Standby Service Information:
----------------------------------------------------------
  Local IP Address       : 192.168.4.1
  Peer IP Address        : 192.168.4.2
  Source Port            : 10245
  Destination Port       : 10245
  Keep Alive Times       : 5
  Keep Alive Interval    : 3
  Service State          : Not Valid
  Service Batch Modules  :
  Shared-key             : -
----------------------------------------------------------

**Table 1** Description of the **display hsb-service** command output
Item	Description
Local IP Address	IP address of the local device. To set this parameter, run the service-ip-port command.
Peer IP Address	IP address of the peer device. To set this parameter, run the service-ip-port command.
Source Port	Local port number. To set this parameter, run the service-ip-port command.
Destination Port	Destination port number. To set this parameter, run the service-ip-port command.
Keep Alive Times	Number of times that heartbeat packets are sent. To set this parameter, run the service-keep-alive detect command.
Keep Alive Interval	Interval for sending heartbeat packets. To set this parameter, run the service-keep-alive detect command.
Service State	Status of the HSB service: Connected Disconnected Not Valid
Service Batch Modules	Service modules bound to an HSB service.
Shared-key	Key used by the HSB devices. To set this parameter, run the key command.