The display igmp-snooping qinq-port-info command displays multicast group membership on a QinQ or dot1q termination sub-interface.
display igmp-snooping qinq-port-info interface interface-type interface-number [ group-address group-address ]
Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.
Parameter |
Description |
Value |
---|---|---|
interface interface-type interface-number |
Displays multicast group membership of a specified interface. |
- |
group-address group-address | Displays group membership of a specified multicast group. If this parameter is not specified, the command displays group membership of all multicast groups on the specified interface. |
The value ranges from 224.0.1.0 to 239.255.255.255, in dotted decimal notation. |
Usage Scenario
This command is used to check group membership on a QinQ or dot1q termination sub-interface.
# Display group membership of all multicast groups on QinQ termination sub-interface GE0/0/18.1.
<HUAWEI> display igmp-snooping qinq-port-info interface GigabitEthernet 0/0/18.1 Interface GigabitEthernet0/0/18.1, 1 Group(s) (Source,Group) PE-VID/CE-VID LiveTime Flag ------------------------------------------------------------------------------- (*,225.0.0.1) 1001/0 -- S- (*,225.0.0.2) 1001/0 00:00:23 -D-
Item |
Description |
---|---|
Interface GigabitEthernet0/0/18.1, 1 Group(s) | Group membership on a termination sub-interface. |
(Source, Group) |
(S, G) entry. If S is displayed as *, multicast data may be sent from any multicast source. If S is displayed as an IP address, multicast data is sent from this IP address. |
PE-VID/CE-VID |
Outer VLAN ID and inner VLAN ID. |
LiveTime |
Time elapsed since the group is discovered, in any of the following formats:
-- indicates that the group Up time is not obtained. |
Flag |
Type of a member port, which can be:
|