display info-center

Function

The display info-center command displays the output configuration of the information center.

Format

display info-center

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

You can run the display info-center command to display all information recorded in the information center.

When a module is specified, you can view all information about the module recorded in the information center.

Example

# Display output configuration of the information center.

<HUAWEI> display info-center
Information Center:enabled                                                      
Log host:                                                                       
        10.1.1.1, channel number 2, channel name loghost,                       
language English , host facility local7                                         
Console:                                                                        
        channel number : 0, channel name : console                              
Monitor:                                                                        
        channel number : 1, channel name : monitor                              
SNMP Agent:                                                                     
        channel number : 5, channel name : snmpagent                            
Log buffer:                                                                     
        enabled,max buffer size 1024, current buffer size 512,                  
current messages 512, channel number : 4, channel name : logbuffer              
dropped messages 0, overwritten messages 53                                     
Trap buffer:                                                                    
        enabled,max buffer size 1024, current buffer size 256,                  
current messages 256, channel number:3, channel name:trapbuffer                 
dropped messages 0, overwritten messages 6229                                   
Information timestamp setting:                                                  
        log - date, trap - date, debug - date millisecond                       
                                                                                
 Sent messages = 270090, Received messages = 281030                             
                                                                                
 IO Reg messages = 2 IO Sent messages = 10940

Choose Columns...

**Table 1** Description of the display info-center command output
Item	Description
Information Center	Information center status: enabled disabled To enable the information center, run the info-center enable command.
Log host	Log host configuration.
10.1.1.1	Log host IP address. To set the log host IP address, run the info-center loghost command.
channel number	Number of a channel used to output information. To set the number of a channel used to output information, run the info-center channel command.
channel name	Name of a channel used to output information. To set the name of a channel used to output information, run the info-center channel name command.
language	Language mode in which information is output to a log host. To set the language mode in which information is output to a log host, run the info-center loghost command.
host facility	Logging tool. To configure the logging tool, run the info-center loghost command.
Console	Console configuration.
Monitor	Remote terminal configuration.
SNMP Agent	SNMP agent configuration.
Log buffer	Log buffer configuration.
enabled	Whether the Switch is enabled to send logs/traps to the log/trap buffer. enabled disabled To enable the Switch to send logs/traps to the log/trap buffer, run the info-center logbuffer or info-center trapbuffer command.
max buffer size	Maximum number of logs/traps in the log/trap buffer.
current buffer size	Maximum number of logs/traps in the current log/trap buffer. To set the maximum number of logs/traps in the current log/trap buffer, run the info-center logbuffer size or info-center trapbuffer size command.
current messages	Number of messages recorded in the log/trap buffer.
dropped messages	Number of messages discarded by the log/trap buffer.
overwritten messages	Number of overwritten messages in the log/trap buffer.
Trap buffer	Trap buffer configuration.
Information timestamp setting	Timestamp format of logs, traps, and debugging messages: boot: indicates that the timestamp is expressed in the format of relative time, a period of time since system start. date: indicates the current system date and time. It is expressed in mm dd yyyy hh:mm:ss format. short-date: indicates the short date. This timestamp differs from date is that the year is not displayed. format-date: indicates that the timestamp is expressed in YYYY-MM-DD hh:mm:ss format. none: indicates that the output information does not contain the timestamp. To configure the timestamp format, run the info-center timestamp command.
Sent messages	Number of sent messages output by information center modules.
Received messages	Number of messages sent to information center modules.
IO Reg messages	Number of receive messages by switch.
IO Sent messages	Number of sent messages by switch.