The display info-center rate-limit threshold command displays the threshold of the log processing rate (maximum number of logs that the information center can process every second). The threshold information includes the default threshold contained in the released version, the default threshold for the specified log ID, and the threshold set through the command lines after the system startup.
You can run the display info-center rate-limit threshold command to check the log processing rate threshold of each module and then adjust the threshold based on service requirements.
<HUAWEI> display info-center rate-limit threshold
Rate limit threshold(per second):
Module Alias Default Config
default 30 30
IPC IPCFRGTOOLARGE 5 5
IPC IPCDUMPMEM 5 5
IPC ALLOCINDEXERR 5 5
IPC DRVNOTSTABLE 2 2
IPC NOTIMODFALNOREASM 2 2
IPC SYNRPCGETSMFAL 5 5
IPC SYNRPCMODUNREG 5 5
IPC SYNRPCRETNULL 5 5
IPC MODULENOTREG 5 5
IPC SENDRETURN 5 5
IPC GETMTUFAL 5 5
IPC ALLOCIPCFRGFAL 5 5
IPC RECVINVALIDMSG 5 5
IPC RCVNOTIQUEERR 5 5
IPC NOTIFYQUEERR 5 5
IPC SENDFINISHRETURN 5 5
IPC RECVINVALIDMSGTYPE 5 5
SOURCE UMSGGETSRCOBJFAL 1 1
Item |
Description |
|---|---|
Module |
Log module name. |
Alias |
Log mnemonic name. |
Default |
The default threshold of the log processing rate. |
Config |
The threshold of the log processing rate set for the information center. |