display interface nve

Function

The display interface nve command displays Network Virtualization Edge (NVE) interface information.

Format

display interface nve [ nve-number | main ]

Parameters

Parameter	Description	Value
nve-number	Specifies the number of an NVE interface. If nve-number is not specified, information about all NVE interfaces is displayed.	The value is 1.
main	Displays the running status and statistics of the main interface.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To monitor the NVE interface status or locate an NVE interface fault on the VXLAN network, run the display interface nve command to check the running status and statistics of the NVE interface.

Example

# Display the running status of the NVE interface.

<HUAWEI> display interface nve 1

Nve1 current state : UP 
Line protocol current state : UP 
Description: 
Route Port
Current system time: 2017-03-28 19:50:24

**Table 1** Description of the **display interface nve** command output
Item	Description
Nve1 current state	Physical status of the NVE interface. The physical status of the successfully created NVE interface is always Up.
Line protocol current state	Link layer protocol status of the NVE interface. The link layer protocol status of the successfully created NVE interface is always Up.
Description	Description of the NVE interface.
Route Port	The interface is a Layer 3 interface.
Current system time	System time.