display ip forwarding status

Function

The display ip forwarding status command displays whether IPv4 Layer 3 unicast forwarding is enabled on a switch.

display ip forwarding status

None

All views

1: Monitoring level

You can run this command to check whether IPv4 Layer 3 unicast forwarding is enabled on a switch.

# Display whether IPv4 Layer 3 unicast forwarding is enabled on the switch.

<HUAWEI> display ip forwarding status
Current IP forwarding status: Open

**Table 1** Description of the **display ip forwarding status** command output
Item	Description
Current IP forwarding status	Whether IPv4 Layer 3 unicast forwarding is enabled: Open: The function is enabled. Closed: The function is disabled. To configure IPv4 Layer 3 unicast forwarding, run the ip forwarding disable command.