display ip rd-filter

Function

The display ip rd-filter command displays the configuration of the route distinguisher (RD) filter.

Product	Support
S5720-EI, S5720-HI, S5720I-SI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S	Supported.
S2720-EI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S6720-LI, and S6720S-LI	Not supported.

display ip rd-filter [ rd-filter-number ]

Parameter	Description	Value
rd-filter-number	Displays the configuration of a RD filter with a specified number.	The value is an integer ranging from 1 to 255.

All views

1: Monitoring level

Usage Scenario

The RD attribute is carried in VPN routes. An RD filter is used to filter VPN routes.

You can run the display ip rd-filter command to:

View detailed information about a configured RD filter.
Check whether an RD filter is successfully deleted after running the undo ip rd-filter command.

Precautions

The display ip rd-filter command:

Displays the configuration information about a specified RD filter, if the number of RD filter is specified.
Displays the configuration information about all RD filters, if the number of the RD filter is not specified.
Does not display any information, if the RD filter does not exist in the system or the RD filter that is queried does not exist.

# Display the configured RD filter.

<HUAWEI> display ip rd-filter

Route Distinguisher Filter 1

        permit 10.1.1.1:1 10.2.2.2:* 100:1 200:*

Route Distinguisher Filter 2

        deny 1:1 2:2

        permit 1:* 2:*