display ip source check user-bind

Function

The display ip source check user-bind command displays the IPSG configurations.

Format

display ip source check user-bind interface interface-type interface-number

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays the IP packet check configuration on a specified interface. The interface is specified by the interface type and number. interface-type specifies the interface type. interface-number specifies the interface number.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display ip source check user-bind command displays the IP packet check configuration on an interface, including IP packet check items and the alarm function of IP packet check.

Example

# Display the IP packet check configuration on GE0/0/1.

<HUAWEI> display ip source check user-bind interface gigabitethernet 0/0/1
 ipv4 source check user-bind enable                                                                                                 
 ipv6 source check user-bind enable 
 ip source check user-bind check-item ip-address                                
 ip source check user-bind alarm enable                                         
 ip source check user-bind alarm threshold 200

**Table 1** Description of the display ip source check user-bind command output
Item	Description
ipv4 source check user-bind enable	IPv4 packet check is enabled.
ipv6 source check user-bind enable	IPv6 packet check is enabled.
ip source check user-bind check-item ip-address	IP packet check items. An IP packet check item can contain the IP address, MAC address, VLAN ID, and interface number. To specify check items, run the ip source check user-bind check-item (interface view) or ip source check user-bind check-item (VLAN view) commands.
ip source check user-bind alarm enable	Alarm function of IP packet check is enabled. To enable the alarm function of IP packet check, run the ip source check user-bind alarm enable command.
ip source check user-bind alarm threshold 200	Alarm threshold for IP packet check. To set the alarm threshold for IP packet check, run the ip source check user-bind alarm threshold command.