display load-balance mode

Function

The display load-balance mode command displays the load balancing mode on a switch.

Format

display load-balance mode [ packet | flow | slot slot-number ]

Parameters

Parameter	Description	Value
packet	Displays information about the switch adopting the per packet load balancing mode.	-
flow	Displays information about the switch adopting the per flow load balancing mode.	-
slot slot-number	Specifies the ID of a slot. After the slot ID is specified, the load balancing mode on a specified switch is displayed.	The value is an integer. It has a fixed value of 0 in a non-stack scenario, and depends on the device configuration in a stack scenario.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Using the display load-balance mode packet or the display load-balance mode flow command displays information about the switch adopting the specified load balancing mode.

The display load-balance mode slot slot-number command displays the load balancing mode on a specified switch.

If neither the slot ID nor load balancing mode is specified in the display load-balance mode command, by default, load balancing mode on the switch is displayed.

Example

# Display the load balancing modes on the switch.

<HUAWEI> display load-balance mode
load-balance flow slot 0

**Table 1** Description of the **display load-balance mode** command output
Item	Description
load-balance	Load balancing mode: packet: per packet load balancing flow: per flow load balancing
slot	Slot ID.