display location-profile

Function

The display location-profile command displays configuration information about a location profile.

Format

display location-profile { all | name profile-name }

Parameters

Parameter	Description	Value
all	Specifies all location profiles.	-
name profile-name	Specifies a location profile.	The location profile name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view configuration information about a location profile to verify the configuration.

Example

# Display all location profiles.

<HUAWEI> display location-profile all
----------------------------------------------------------
Profile name                   Reference
----------------------------------------------------------
default                             1
----------------------------------------------------------
Total: 1

**Table 1** Description of the **display location-profile all** command output
Item	Description
Profile name	Name of a location profile.
Reference	Number of times a location profile is referenced.

# Display the default configuration of the location profile default.

<HUAWEI> display location-profile name default
--------------------------------------------------------------------------------
Aeroscout-tag                  : disable
Aeroscout-mu                   : disable
Aeroscout ae-port              : -
Aeroscout compound-time(100ms) : 65535
Aeroscout via-AC               : disable
Aeroscout via-AC port          : -
Ekahau-tag                     : disable
Ekahau erc IP-address          : -
Ekahau erc port                : -
Ekahau via-AC                  : disable
Ekahau via-AC port             : -
Source IP-address              : -
private mu                     : disable
private server                 : -
private server domain          : -
private server port            : -
private via-AC                 : disable
private via-AC port            : -
private report-frequency(ms)   : 20000
private report-protocol        : udp
private mu protocol-version    : v3
collect location data                      : disable
collect location data RSSI threshold(dBm)  : -75
------------------------------------------------------------

**Table 2** Description of the **display location-profile name default** command output
Item	Description
Aeroscout-tag	Whether WLAN location of AeroScout tags is enabled. To configure the function, run the aeroscout tag-enable command.
Aeroscout-mu	Whether WLAN location of AeroScout MUs is enabled. To configure the function, run the aeroscout mu-enable command.
Aeroscout ae-port	Port number used by APs to report location packets. To configure the parameter, run the aeroscout server command.
Aeroscout compound-time	Aggregation time of AeroScout location packets. To configure the parameter, run the aeroscout compound-time command.
Aeroscout via-AC	Whether AeroScout location packets are reported to the location server through an AC. enable: The AeroScout location packets are reported to the location server through an AC. disable: The AeroScout location packets are not reported to the location server through an AC. To configure the parameter, run the aeroscout server command.
Aeroscout via-AC port	Port number used by an AC to report AeroScout location packets. To configure the parameter, run the aeroscout server command.
Ekahau-tag	Whether WLAN location of Ekahau tags is enabled. To configure the function, run the ekahau tag-enable command.
Ekahau erc IP-address	IP address of the Ekahau location server. To configure the parameter, run the ekahau server command.
Ekahau erc port	Port number of the Ekahau location server. To configure the parameter, run the ekahau server command.
Ekahau via-AC	Whether Ekahau location packets are reported to the location server through an AC. enable: The Ekahau location packets are reported to the location server through an AC. disable: The Ekahau location packets are not reported to the location server through an AC. To configure the parameter, run the ekahau server command.
Ekahau via-AC port	Port number used by an AC to report Ekahau location packets. To configure the parameter, run the ekahau server command.
Source IP-address	Source IP address used by an AC to report location packets. To configure the parameter, run the source (location profile view) command.
private mu	Whether terminal location is enabled. To configure the function, run the private mu-enable command.
private server	IP address of the terminal location server. To configure the parameter, run the private server command.
private server domain	Domain name of the terminal location server. To configure the parameter, run the private server command.
private server port	Port number of the terminal location server. To configure the parameter, run the private server command.
private via-AC	Whether terminal location packets are reported to the location server through an AC. enable: The terminal location packets are reported to the location server through an AC. disable: The terminal location packets are not reported to the location server through an AC. To configure the parameter, run the private server command.
private via-AC port	Port number used by an AC to report terminal location packets. To configure the parameter, run the private server command.
private report-frequency(ms)	Interval at which an AP reports terminal location packets. To configure the parameter, run the private report-frequency command.
private report-protocol	Protocol used by an AP to report information. To configure the parameter, run the private report-protocol command.
private mu protocol-version	Terminal location protocol version. To configure the parameter, run the private mu protocol-version command.
collect location data	Whether the device is enabled to collect wireless device location data. To configure the parameter, run the collect-location-data enable command.
collect location data RSSI threshold(dBm)	RSSI threshold for wireless device location data. To configure the parameter, run the collect-location-data rssi-threshold command.