display lspv configuration

Function

The display lspv configuration command displays the current configuration of LSPV tracert.

display lspv configuration

None

All views

1: Monitoring level

You can run the display lspv configuration command to check the current LSPV configurations.

# Display the current configuration of LSPV tracert.

<HUAWEI> display lspv configuration
lspv packet filter 2100
undo lspv mpls-lsp-ping echo enable

**Table 1** Description of the **display lspv configuration** command output
Item	Description
lspv packet filter 2100	Filters the LSPV tracert packet with the specific source address according to ACL 2100. To configure the filtering of the LSPV tracert packet with the specific source address, run the lspv packet-filter command.
undo lspv mpls-lsp-ping echo enable	Disables the response to MPLS Ping packets. To configure a device to respond to MPLS Echo Request packets, run the lspv mpls-lsp-ping echo enable command.