The display mac-address { ap-id | ap-name} command displays all dynamic, dynamic secure, and sticky MAC address entries on an AP's wired interface.
Parameter |
Description |
Value |
---|---|---|
ap-id ap-id |
Displays all dynamic, dynamic secure, and sticky MAC address entries on wired interfaces of the AP with the specified ID. |
The AP ID must exist. |
ap-name ap-name |
Displays all dynamic, dynamic secure, and sticky MAC address entries on wired interfaces of the AP with the specified name. |
The AP name must exist. |
interface-type interface-number |
Displays all dynamic, dynamic secure, and sticky MAC address entries on a specified interface.
|
The following types of outbound interfaces are supported:
|
You can run the display mac-address { ap-id | ap-name} command to check all dynamic, dynamic secure, and sticky MAC address entries on an AP's wired interface, including the MAC addresses and VLANs that the AP learns on specified interfaces.
# Display all dynamic, dynamic secure, and sticky MAC address entries on wired interfaces of the AP with ID 1.
<HUAWEI> display mac-address ap-id 1 ethernet 0
----------------------------------------------------------
MAC Address VLAN/VSI Learned-From Type
----------------------------------------------------------
1051-7254-5a80 1/- Ethernet0/0/0 dynamic
----------------------------------------------------------
Total: 1
Item |
Description |
---|---|
MAC Address |
MAC address. |
VLAN/VSI |
VLAN or VSI to which the device belongs. |
Learned-From |
Interface on which the MAC address is learned. |
Type |
Type of a MAC address entry. |