display mac-address hash-mode

Function

The display mac-address hash-mode command displays the running hash mode and configured hash mode on the device.

The S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735-S-I, S5735S-S, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S do not support this command.

Format

display mac-address hash-mode

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After a hash mode is configured, you can run the display mac-address hash-mode command to check the configuration.

Precautions

After the hash algorithm is changed, restart the device for the configuration to take effect.

Example

# Display the running hash mode and configured hash mode on the device.

<HUAWEI> display mac-address hash-mode
  MAC address hash mode status:                                                 
--------------------------------------------                                    
 Slot       CurMode         CfgMode                                             
--------------------------------------------                                    
 0         crc16-lower     crc32-lower                                         
--------------------------------------------

**Table 1** Description of the display mac-address hash-mode command output
Item	Description
Slot	Slot ID.
CurMode	Running hash mode on the device. After changing the hash algorithm and saving the configuration, restart the device for the configuration to take effect.
CfgMode	Configured hash mode on the device. To specify the parameter, run the mac-address hash-mode command.