display mac-address multiport

Function

The display mac-address multiport command displays MAC address entries configured for multiple outbound interfaces.

Format

display mac-address multiport mac-address vlan vlan-id

display mac-address multiport [ vlan vlan-id ] [ total-number ]

Only the S5720-EI, S5720-HI, S5720I-SI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Parameters

Parameter	Description	Value
mac-address	Specifies a MAC address.	The value is in the H-H-H format. An H contains 1 to 4 hexadecimal digits.
vlan vlan-id	Specifies a VLAN.	The value is an integer that ranges from 1 to 4094.
total-number	Specifies the number of MAC address entries mapping multiple outbound interfaces.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mac-address multiport command to check MAC address entries configured for multiple outbound interfaces. If no parameter is specified, all MAC address entries configured for multiple outbound interfaces are displayed. To configure MAC address entries mapping multiple outbound interfaces, run the mac-address multiport interface or mac-address multiport command.

Example

# Display MAC address entries configured for multiple outbound interfaces in VLAN 10.

<HUAWEI> display mac-address multiport vlan 10
--------------------------------------------------------------------------------                                                    
MAC Address       VLANID    Out-Interface               Status                                                                      
--------------------------------------------------------------------------------                                                    
0023-0045-0078    10        GigabitEthernet0/0/1        Active                                                                      
                                            1 port(s)                                                                               
--------------------------------------------------------------------------------                                                    
 Total Group(s) : 1

**Table 1** Description of the **display mac-address multiport** command output
Item	Description
MAC Address	-
VLANID	VLAN that the outbound interface mapping the destination MAC address belongs to.
Out-Interface	Outbound interface mapping the destination MAC address.
Status	Current VLAN status, including: InActive: indicates that no VLAN is created or a VLAN is created but no physical interface is added to the VLAN. Active: indicates that a VLAN has been created and physical interfaces are added to the VLAN.
Total Group(s)	Total number of MAC address entries mapping multiple outbound interfaces.