The display mpls l2vc track admin-vc command displays information about service PWs or switching PWs that are associated with an mPW.
Parameter | Description | Value |
---|---|---|
interface loopback interface-number | Specifies the loopback interface on which the mPW is configured. | - |
upe | Displays information about switching PWs of the UPE type. | - |
After service PWs or switching PWs are associated with an mPW, you can run the display mpls l2vc track admin-vc command to view information about these PWs, facilitating configuration and management.
# Display information about service PWs or switching PWs that are associated with the mPW configured on loopback 0.
<HUAWEI> display mpls l2vc track admin-vc interface loopback 0
Total VC : 0 2 up 0 down
Admin-PW state : up
Peer IP : 1.1.1.1
PW type : UPE
Total VC : 2 2 up 0 down
*Client Interface : Vlanif10
VC State : up
VC ID : 1113
VC Type : Ethernet
Link State : up
*Client Interface : Vlanif10
VC State : up
VC ID : 2223
VC Type : Ethernet
Link State : up
Item |
Description |
---|---|
Total VC |
Number of all the service PWs and switching PWs that are associated with the mPW. |
Admin-PW state |
Status of the mPW.
|
Peer IP |
IP address of an mPW peer. The peers of the service or switching PWs must have the same IP address as that of the mPW. |
PW type |
PW type. Currently, only UPE is supported. |
*Client Interface |
AC interface of the service PW or switching PW. |
VC State |
VC status.
|
VC ID |
VC ID. The VC ID uniquely identifies a VC together with the VC type. |
VC Type |
Encapsulation type of the VC.
|
Link State |
Forwarding status of the PW.
|