display mpls l2vpn (route-target-list)

Function

The display mpls l2vpn command displays the VPN target list for Kompella VLL.

Format

display mpls l2vpn { export-route-target-list | import-route-target-list }

Parameters

Parameter	Description	Value
export-route-target-list	Displays the VPN target list for Kompella VLL in the outbound direction.	-
import-route-target-list	Displays the VPN target list for Kompella VLL in the inbound direction.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When an L2VPN connection in Kompella mode is Up but packet forwarding between CE devices fails, you can run this command to view the VPN target list of a specified VPN instance and check whether the VPN targets of the two PE devices match each other.

The VPN target in the outbound direction of the local PE device must be the same as the VPN target in the inbound direction of the remote PE device.
The VPN target in the inbound direction of the local PE device must be the same as the VPN target in the outbound direction of the remote PE device.

Example

# Display the VPN target list for Kompella VLL in the inbound direction.

<HUAWEI> display mpls l2vpn import-route-target-list
import vpn target list:
 744:7  745:7  746:7  888:8

# Display the VPN target list for Kompella VLL in the outbound direction.

<HUAWEI> display mpls l2vpn export-route-target-list
export vpn target list:
 755:7  888:8

**Table 1** Description of the **display mpls l2vpn** command output
Item	Description
import vpn target list	VPN target list in the inbound direction.
export vpn target list	VPN target list in the outbound direction.