| Parameter | Description | Value |
|---|---|---|
| interface interface-type interface-number | Specifies the type and number of an interface.
|
- |
| verbose | Displays detailed VPWS service information. | - |
Usage Scenario
When configuring or commissioning VPWS, you can run the display mpls l2vpn vpws command to check whether VPWS service configurations are correct.
Note the following points when using the display mpls l2vpn vpws command:
If interface interface-type interface-number is specified, only VPWS service information on a specified AC interface is displayed.
If verbose is also specified, detailed information about the VPWS service on a specified AC interface is displayed.
Prerequisites
VPLS configurations are complete on the local end.
<HUAWEI> display mpls l2vpn vpws Pri : Primary Sec : Secondary Byp : Bypass PWb : PW-bypass ACb : AC-bypass Access Circuit Virtual Circuit States Active Role GE0/0/2 10.3.3.9:200 Up Active Pri 10.2.2.9:201 Up Inactive Sec
Item |
Description |
|---|---|
Access Circuit |
Access circuit. |
Virtual Circuit |
Virtual circuit. |
States |
VC status, which can be:
|
Active |
Activation status of a VC, which can be:
|
Role |
Role of a PW, which can be:
|
<HUAWEI> display mpls l2vpn vpws interface gigabitethernet 0/0/2 verbose Access circuit : GigabitEthernet0/0/2 Interface state : Up Protect mode : FRR Members: Virtual Circuit States Active Role 10.3.3.9:200 Up Active Primary 10.2.2.9:201 Up Inactive Secondary Primary: VC type : LDP VC VC state : up Peer IP : 10.3.3.9 VC ID : 200 Encapsulation type : Ethernet LDP session state : up VC information (Local / Remote) Label : 1025 / 1024 MTU : 1500 / 1500 Control word : enable / enable Status code : 0x0 / 0x0 Group ID : 0 / 0 VCCV status : cw alert ttl lsp-ping bfd / cw alert ttl lsp-ping bfd VC last up time : 2013/12/21 16:42:51 VC total up time : 0 days, 6 hours, 20 minutes, 0 seconds Secondary: VC type : LDP VC VC state : up Peer IP : 10.2.2.9 VC ID : 201 Encapsulation type : Ethernet LDP session state : up VC information (Local / Remote) Label : 1026 / 1025 MTU : 1500 / 1500 Control word : enable / enable Status code : 0x0 / 0x0 Group ID : 0 / 0 VCCV status : cw alert ttl lsp-ping bfd / cw alert ttl lsp-ping bfd VC last up time : 2013/12/21 14:57:13 VC total up time : 0 days, 20 hours, 44 minutes, 40 seconds
Item |
Description |
|---|---|
Access Circuit |
Access circuit. |
Protect mode |
Protection mode, which can be FRR, independent, or master. |
| Members | PW member. |
| Virtual Circuit | Virtual circuit. |
| States | VC status |
| Active | Activation status of a VC, which can be: |
| Role | Role of a PW, which can be:
|
| Primary | Information about the primary PW. |
| VC type | The type of a VC. |
| VC state | VC status. |
| Peer IP | IP address of a peer. |
| VC ID | ID of a VC. The value is an integer in decimal notation. The default value is 0. |
| Encapsulation type | Encapsulation type of a VC. |
| LDP session state | Status of an LDP session. |
| VC information (Local / Remote) | VC information (local/remote). |
| Label | VC label. |
| MTU | Maximum transmission unit of a VC interface. |
| Control word | Whether the control word is enabled. |
| Status code | Status code, which can be:
|
| Group ID | Group ID. |
| VCCV status | VCCV status. |
| VC last up time | Time when the VC last goes Up. |
| VC total up time | Total Up time of a VC. |
| Secondary | Information about the secondary PW. |