display mpls label-stack ilm inlabel

Function

The display mpls label-stack ilm inlabel command displays information about the label stack for packets with a specified incoming label.

Format

display mpls label-stack ilm inlabel in-label

Parameters

Parameter	Description	Value
in-label	Specifies the incoming label for the packets about which label-stack information is to be displayed.	The value is an integer ranging from 16 to 1048575.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to query information about the outgoing label stack for packets based on the incoming label. The supported public network tunnels include static LSP tunnels, LDP LSPs, dynamic TE tunnels, and static TE tunnels. This command cannot be used in the following situations:

Tunnels overlap.
Tunnels load-balance traffic.
The primary and secondary SPE egresses are used.
Traffic is iterated to a ring network.
Layer 3 labels are used.

Example

# Display the outgoing label, outbound interface, and tunnel type in the packets with the incoming label value of 1028.

<HUAWEI> display mpls label-stack ilm inlabel 1028
Label-stack  : 1
Level        : 1
Type         : LDP
Label        : 1025
OutInterface : Vlanif111

**Table 1** Description of the **display mpls label-stack ilm inlabel** command output
Item	Description
Label-stack	Number of label stacks
Level	Number of labels
Type	Tunnel type
Label	Value of the outgoing label
OutInterface	Outbound interface