display mpls label-stack vpn-instance

Function

The display mpls label-stack vpn-instance command displays information about L3VPN label stacks.

Format

display mpls label-stack vpn-instance vpn-instance-name ip-address

Parameters

Parameter	Description	Value
vpn-instance-name	Specifies the name of a VPN instance.	The value is the name of an existing VPN instance.
ip-address	Specifies a private IPv4 address.	The value is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

In a non-inter-AS L3VPN scenario, this command allows you to query label stack information on PEs based on VPN instance names and private IP addresses.

Example

# Display label stack information about the VPN instance named vpna.

<HUAWEI> display mpls label-stack vpn-instance vpna 10.12.12.1
Label-stack  : 1
Level        : 1
Type         : VPN
Label        : 1033
Level        : 2
Type         : LDP
Label        : 1041
OutInterface : Vlanif100

**Table 1** Description of the **display mpls label-stack vpn-instance** command output
Item	Description
Label-stack	Number of label stacks
Level	Number of labels
Type	Tunnel type
Label	Value of the outgoing label
OutInterface	Outbound interface