display mpls rsvp-te

Function

The display mpls rsvp-te command displays the RSVP-TE configurations.

Format

display mpls rsvp-te

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When configuring a dynamic MPLS TE tunnel, you can run the display mpls rsvp-te command to view RSVP-TE configurations.

Example

# Display information about RSVP-TE.

<HUAWEI> display mpls rsvp-te
 LSR ID: 1.1.1.9                                                                
 RSVP-TE Function Capability: Enable                                            
 Resv Confirmation Request: DISABLE                                             
 RSVP Hello Extension: ENABLE                                                   
 Hello interval: 3 sec         Max Hello misses: 3                              
 Path and Resv message refresh interval: 30 sec                                 
 Path and Resv message refresh retries count: 3                                 
 Blockade Multiplier: 4                                                         
 Graceful-Restart Capability: GR-Support GR-Self                                
 Restart Time:  90000 Millisecond                                               
 Recovery Time: 0 Millisecond                                                   
 Bfd Enabled: DISABLE                  Bfd Min-Tx: 1000                         
 Bfd Min-Rx: 1000                      Bfd Detect-Multi: 3                      
 Soft Preemption Timeout: 30 sec

**Table 1** Description of the display mpls rsvp-te command output
Item	Description
LSR ID	LSR ID in the format X.X.X.X.
RSVP-TE Function Capability	Whether RSVP-TE is enabled. To enable the RSVP-TE function, run the mpls rsvp-te command.
Resv Confirmation Request	Whether reservation confirmation is requested. To enable the reservation confirmation mechanism, run the mpls rsvp-te resvconfirm command.
RSVP Hello Extension	Whether the RSVP Hello extension is enabled. To enable the RSVP Hello extension, run the mpls rsvp-te hello command.
Hello interval	The interval at which Hello messages are sent, in seconds. To specify the interval, run the mpls rsvp-te timer hello command.
Max Hello misses	Maximum number of times for the consecutively lost Hello messages. To specify the maximum number, run the mpls rsvp-te hello-lost command.
Path and Resv message refresh interval	Time interval at which the Path and Resv messages are refreshed, in seconds. To specify the interval, run the mpls rsvp-te timer refresh command.
Path and Resv message refresh retries count	Number of retry times allowed for refreshing the Path and Resv messages. To specify the number, run the mpls rsvp-te keep-multiplier command.
Blockade Multiplier	Multiplier for keeping the blocked state.
Graceful-Restart Capability	RSVP GR capability of a device: GR-Support GR-Self: indicates that the RSVP GR on the local node is enabled and the RSVP GR of the neighbor is supported. GR-Self: indicates that the RSVP GR is enabled only on the local node. GR-Support: indicates that the RSVP GR of the neighbor is supported. DISABLE: indicates that the RSVP GR is disabled. To enable the RSVP GR capability, run the mpls rsvp-te hello support-peer-gr command ormpls rsvp-te hello full-gr command.
Restart Time	Start time of the GR process, in milliseconds. It is displayed only after the command mpls rsvp-te hello basic-restart-time is run.
Recovery Time	Time spent on recovering all LSPs, in milliseconds. It is displayed only after the command mpls rsvp-te hello basic-restart-time is run.
Bfd Enabled	Whether the BFD for RSVP is enabled globally in the MPLS view: ENABLE: indicates that BFD for RSVP is globally enabled in the MPLS view. DISABLE: indicates that BFD for RSVP is globally disabled in the MPLS view. To enable the BFD for RSVP function, run the mpls rsvp-te bfd all-interfaces enable command.
Bfd Min-Tx	Local interval at which BFD packets are sent, in milliseconds. To specify the interval, run the mpls rsvp-te bfd all-interfaces command.
Bfd Min-Rx	Local interval at which BFD packets are received, in milliseconds. To specify the interval, run the mpls rsvp-te bfd all-interfaces command.
Bfd Detect-Multi	Local BFD detection multiplier. To specify the multiplier, run the mpls rsvp-te bfd all-interfaces command.
Soft Preemption Timeout	Timeout period of soft preemption.