display mpls rsvp-te rsb-content

Function

The display mpls rsvp-te rsb-content command displays information about the RSVP TE Reserve State Block (RSB).

Format

display mpls rsvp-te rsb-content [ ingress-lsr-id tunnel-id lsp-id ]

Parameters

Parameter	Description	Value
ingress-lsr-id	Specifies the ingress LSR ID.	The value is in dotted decimal notation.
tunnel-id	Specifies the tunnel ID.	The value is an integer that ranges from 0 to 65535.
lsp-id	Specifies the LSP ID.	The value is an integer that ranges from 0 to 65535.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If no parameter is specified, information about all RSVP TE RSBs are displayed.

Example

# Display information about the RSVP TE Reserve State Block.

<HUAWEI> display mpls rsvp-te rsb-content 10.1.1.9 300 3
==============================================================                  
                       The RSB Content                                          
==============================================================                  
 Tunnel Addr: 10.3.3.9                Session Tunnel ID: 300                    
 Tunnel ExtID: 10.1.1.9                                                          
 Next Hop: 172.16.1.2                 Reservation Style: SE Style               
 Reservation Incoming Interface: Vlanif100                           
 Reservation Interface: Vlanif100                                    
 Filter Spec Information-                                                       
   The filter number: 1                                                         
   Ingress LSR ID: 10.1.1.9        Local LSP ID: 3       OutLabel: 1040         
   Cleanup Timer : 504613260                                                    
   RRO Information-                                                             
     RRO-CType: IPV4   RRO-IPAddress: 172.16.1.2       RRO-IPPrefixLen: 32    
     RRO-CType: Label    RRO-Label: 1040   
     RRO-CType: IPV4   RRO-IPAddress: 10.2.2.9         RRO-IPPrefixLen: 32    
     RRO-CType: Label    RRO-Label: 1040   
     RRO-CType: IPV4   RRO-IPAddress: 172.20.1.1       RRO-IPPrefixLen: 32      
     RRO-CType: IPV4   RRO-IPAddress: 172.20.1.2       RRO-IPPrefixLen: 32      
     RRO-CType: Label    RRO-Label: 3
     RRO-CType: IPV4   RRO-IPAddress: 10.3.3.9         RRO-IPPrefixLen: 32      
     RRO-CType: Label    RRO-Label: 3
   Message ID : 0               
 FlowSpec Information-                                                          
   Token bucket rate: 0.00                                                      
   Token bucket size: 1000.00                                                   
   Peak data rate: 0.00                                                         
   Minimum policed unit: 0                                                      
   Maximum packet size: 1500                                                    
   Bandwidth guarantees: 0.00                                                   
   Delay guarantees: 0                                                          
   Qos Service is Controlled                                                    
 Resv Message arrive on Vlanif100 from NHOP 172.16.1.2

**Table 1** Description of the display mpls rsvp-te rsb-content command output
Item	Description
Tunnel Addr	Tunnel destination address in the format X.X.X.X.
Session Tunnel ID	Tunnel ID.
Tunnel ExtID	Tunnel extension ID (ingress LSR ID) in the format X.X.X.X.
Next Hop	Next-hop address in the format X.X.X.X.
Reservation Style	Reservation style: SE FF
Reservation Incoming Interface	Incoming interface for the reservation message.
Reservation Interface	Name of the interface on which bandwidth is reserved.
Message ID	ID of the Refresh Reduction message.
Filter Spec Information	Filtering conditions.
The filter number	Total number of filters.
Ingress LSR ID	LSR ID of the ingress node in the format X.X.X.X.
Local LSP ID	Local identifier of an LSP.
OutLabel	Outgoing label.
Cleanup Timer	Timeout timer.
RRO Information	Information about the RRO.
RRO-CType	Class type in the RRO: IPv4 Label
RRO-IPAddress	IP address in the RRO, in the format X.X.X.X.
RRO-IPPrefixLen	Length of the route prefix in the RRO.
RRO-Label	Label information in the RRO
FlowSpec Information	Traffic information including flow specifications.
Token bucket rate	Token bucket rate, in byte/s.
Token bucket size	Token bucket size.
Peak data rate	Peak data rate, in byte/s.
Minimum policed unit	Minimum policed unit.
Maximum packet size	Maximum packet size.
Bandwidth guarantees	Bandwidth guarantee.
Delay guarantees	Delay guarantee.
Qos Service	QoS guarantee/control.
Resv Message	Reservation message received on an interface.