display mpls static-l2vc brief

Function

The display mpls static-l2vc brief command displays brief information about static VCs on the device.

Format

display mpls static-l2vc brief

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display mpls static-l2vc brief command is recommended when a large number of static VCs are configured on the device.

Example

# Display brief information about static VCs on the device.

<HUAWEI> display mpls static-l2vc brief
Total svc connections:  2,  1 up,  1 down
 
 *Client Interface            : Eth-Trunk2  is up
  AC Status                   : up
  VC State                    : up
  VC ID                       : 0
  VC Type                     : VLAN
  Destination                 : 10.1.1.1
  
 *Client Interface            : Eth-Trunk3  is down
  AC Status                   : down
  VC State                    : down
  VC ID                       : 100
  VC Type                     : Ethernet
  Destination                 : 10.1.1.2

**Table 1** Description of the **display mpls static-l2vc brief** command output
Item	Description
Total SVC Connections	Number of established SVCs, including the number of SVCs in Up and Down states.
Client Interface	AC interface and its status.
AC Status	Status of the AC: up: An AC has been established. down: An AC is not established.
VC State	Status of the VC: up: A VC has been established. down: A VC is not established.
VC ID	ID of the static VC. If you run the mpls static-l2vc command without the VC ID specified, the value of this field is displayed as 0.
VC Type	Encapsulation type of the VC: VLAN Ethernet
Destination	IPv4 address of the peer. Generally, the value is the loopback address of the peer.