display mpls te srlg

Function

The display mpls te srlg command displays the Shared Risk Link Group (SRLG) configurations and the interfaces that belong to it.

display mpls te srlg { srlg-number | all }

Parameter	Description	Value
srlg-number	Specifies the number of the SRLG to which an interface belongs.	The value is an integer that ranges from 0 to 4294967295.
all	Displays information about all SRLGs on the node and the interfaces that belong to the SRLG groups.	-

All views

1: Monitoring level

After the configuring the SRLG on an interface, you can run the display mpls te srlg command to check the configuration.

The display mpls te srlg command displays the following information:

# Display information about all SRLGs on the node.

<HUAWEI> display mpls te srlg all
Total SRLG supported : 1024
Total SRLG configured : 1
SRLG  239:           Vlanif30

**Table 1** Description of the display mpls te srlg all command output
Item	Description
Total SRLG supported	Total SRLGs supported.
Total SRLG configured	Total SRLGs configured.
SRLG	Shared risk link group. To set the shared risk link group, run the mpls te srlg command.