display mpls te tunnel-interface failed

Function

The display mpls te tunnel-interface failed command displays the MPLS TE tunnels that fail to be set up or that are being set up.

Format

display mpls te tunnel-interface failed

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring multiple MPLS TE tunnels, you can use the display mpls te tunnel-interface failed command to check whether there are any tunnels that fail to be set up or are still being set up.

Example

# Display the MPLS TE tunnels that fail to be set up or that are being set up.

<HUAWEI> display mpls te tunnel-interface failed
    Tunnel name       SessionId       State Desc                                
    -----------------------------------------------------------                 
    Tunnel1          39              DOWN

**Table 1** Description of the display mpls te tunnel-interface failed command output
Item	Description
Tunnel name	Name of a tunnel interface.
SessionId	Session ID, which is the tunnel ID.
State Desc	Description of the tunnel status: UP: The tunnel is in Up state. DOWN: The tunnel is in Down state.