display mpls te tunnel-interface lsp-constraint

Function

The display mpls te tunnel-interface lsp-constraint command displays information about the CR-LSP attribute template on an MPLS TE tunnel interface.

Format

display mpls te tunnel-interface lsp-constraint [ tunnel interface-number ]

Parameters

Parameter	Description	Value
tunnel interface-number	Specifies information about the CR-LSP attribute template on a specified MPLS TE tunnel interface.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To view the information about the CR-LSP attribute template on an MPLS TE tunnel interface, run the display mpls te tunnel-interface lsp-constraint command.

Example

# Display information about the CR-LSP attribute template on all MPLS TE tunnel interfaces.

<HUAWEI> display mpls te tunnel-interface lsp-constraint
    Tunnel Name                     :  Tunnel1                            
    Primary-lsp-constraint Name     :  p1                                       
    Hotstandby-lsp-constraint Number:  2                                        
    Hotstandby-lsp-constraint Name  :  p1                                       
    Ordinary-lsp-constraint Number  :  2                                        
    Ordinary-lsp-constraint Name    :  p1

**Table 1** Description of the display mpls te tunnel-interface lsp-constraint command output
Item	Description
Tunnel Name	Name of a tunnel.
Primary-lsp-constraint Name	Name of a CR-LSP attribute template.
Hotstandby-lsp-constraint Number	Number of the hot-standby CR-LSP attribute template, which indicates the sequence in which the template is used. To set the number of the hot-standby CR-LSP attribute template, run the mpls te hotstandby-lsp-constraint command.
Hotstandby-lsp-constraint Name	Name of a hot-standby CR-LSP attribute template. To set the name of a hot-standby CR-LSP attribute template, run the mpls te hotstandby-lsp-constraint command.
Ordinary-lsp-constraint Number	Number of the ordinary CR-LSP attribute template, which indicates the sequence in which the template is used. To set the number of the ordinary CR-LSP attribute template, run the mpls te ordinary-lsp-constraint command.
Ordinary-lsp-constraint Name	Name of an ordinary CR-LSP attribute template. To set the name of an ordinary CR-LSP attribute template, run the mpls te ordinary-lsp-constraint command.