display mpls te tunnel statistics

Function

The display mpls te tunnel statistics command displays the number and status of MPLS TE tunnels.

Format

display mpls te tunnel statistics

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To view the number and status of MPLS TE tunnels, run the display mpls te tunnel statistics command.

Example

# Display the number and status of MPLS TE tunnels.

<HUAWEI> display mpls te tunnel statistics
Ingress:    84 Tunnels     83 Up,     83 CRLSPs Up
             0 Modified,    0 In-Progress,    1 Failed
Transit:     2 Up
Egress :     3 Up

**Table 1** Description of the display mpls te tunnel statistics command output
Item	Description
Ingress	Number and status of MPLS TE tunnels on the local LSR functioning as the ingress node: Tunnel: indicates the number of primary tunnels. Up: indicates the number of MPLS TE tunnels in the Up state. CRLSPs Up: indicates the number of CR-LSPs in the Up state. Modified: indicates the number of tunnels in the reestablishing state. NOTE: The possible causes that an MPLS TE tunnel is in the Modified state are as follows: Configurations of the MPLS TE tunnel are manually modified. The MPLS TE tunnel is being re-optimized. The MPLS TE tunnel is in the FRR inuse state. The MPLS TE tunnel is in the Backup state. In-Progress: indicates the number of MPLS TE tunnels in the establishing process. At the moment, these tunnels do not go Up. Failed: indicates the number of MPLS TE tunnels in the Down state.
Transit	Number of MPLS TE tunnels, which are in the Up state, on the local LSR functioning as a transit node.
Egress	Number of MPLS TE tunnels, which are in the Up state, on the local LSR functioning as the egress node.