display mux-vlan

Function

Using the display mux-vlan command, you can view the MUX VLAN configuration.

Format

display mux-vlan

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After configuring the MUX VLAN function, you can use the display mux-vlan command to verify the configuration. This command displays the principal VLAN ID, subordinate VLAN ID, VLAN type, and interfaces in each VLAN.

Precautions

If no MUX VLAN is configured by using the mux-vlan command, the display mux-vlan command does not display any information.

Example

# Display the MUX VLAN configuration.

<HUAWEI> display mux-vlan
Principal Subordinate Type      Interface
-----------------------------------------------------------------------------
100       -           principal    
100       120         separate     GigabitEthernet0/0/1
100       130         group        GigabitEthernet0/0/2
100       140         group        GigabitEthernet0/0/3
-----------------------------------------------------------------------------

**Table 1** Description of the display mux-vlan command output
Item	Description
Principal	ID of a principal VLAN. To specify the parameter, run the mux-vlan command.
Subordinate	ID of a subordinate VLAN To specify the parameter, run the subordinate group, or subordinate separate command.
Type	Type of a VLAN. principal: indicates a principal VLAN, configured by the mux-vlan command. group: indicates a subordinate group VLAN, configured by the subordinate group command. separate: indicates a subordinate separate VLAN, configured by the subordinate separate command.
Interface	Interfaces in a VLAN.