display nqa-agent

Function

The display nqa-agent command displays the status and configuration of the specified or all NQA test instances on an NQA client.

Format

display nqa-agent [ admin-name test-name ] [ verbose ]

Parameters

Parameter	Description	Value
admin-name	Specifies the administrator of an NQA test instance.	The value is a string of 1 to 32 characters.
test-name	Specifies the name of an NQA test instance.	The value is a string of 1 to 32 characters.
verbose	Indicates detailed information about the client status of an NQA test.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the test instances are configured on an NQA client, run the display nqa-agent command to view the status and configuration of the specified or all NQA test instances on an NQA client.

Example

# Display the status and configuration of all NQA test instances on an NQA client.

<HUAWEI> display nqa-agent
nqa test-instance admin ftp                                                     
 test-type ftp                                                                  
 ftp-operation get                                                              
 nqa status : normal                                                            
nqa test-instance admin icmp                                                    
 nqa status : normal                                                            
nqa test-instance admin jitter                                                  
 test-type jitter                                                               
 destination-address ipv4 10.10.10.10                                           
 destination-port 100                                                           
 nqa status : normal

**Table 1** Description of the **display nqa-agent** command output
Item	Description
nqa test-instance admin icmp test-type icmp destination-address ipv4 192.168.1.2 nqa status : normal	The administrator of NQA test instance icmp is admin. Configurations of this test instance include the following: test-type destination-address nqa status You can run the nqa command to configure an NQA test instance. Configurations of different NQA test instances are not the same. For details, see Configuring an NQA Test Instance.