display ntdp

Function

The display ntdp command displays NTDP configuration.

Format

display ntdp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display ntdp command to check the NTDP configuration of a switch without considering whether NTDP is enabled globally or on interfaces on the switch.

Example

# Display the NTDP configuration of a switch.

<HUAWEI> display ntdp

Network topology discovery protocol is enabled
Hops      : 8                                                                  
Timer     : 0 min                                                               
Hop Delay : 200 ms                                                              
Port Delay: 20 ms                                                               
Total time for last collection: 330 ms

**Table 1** Description of the **display ntdp** command output
Item	Description
Network topology discovery protocol is status	The global NTDP function is in status state. status includes the following types of status: disabled: NTDP is disabled globally. enabled: NTDP is enabled globally. To set this value, run the ntdp enable (system view) command.
Hops	Topology collection range (the number of hops). To set this value, run the ntdp hop command.
Timer	Interval for collecting topology information. To set this value, run the ntdp timer command.
Hop Delay	Delay for the first interface to forward NTDP topology request packets. To set this value, run the ntdp timer hop-delay command.
Port Delay	Delay for other interfaces to forward NTDP topology request packets. To set this value, run the ntdp timer port-delay command.
Total time for last collection	Duration for collecting topology information last time.